Now showing items 1-6 of 6

    • Yu, John J.; Péton, Nicolas (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station; Texas A & M University. Libraries; Texas A & M University. Libraries, 2021)
      The influence coefficient (IC) method is typically used in balancing, especially on-site. For a two-bearing machine, there are basically two approaches to apply this method. The first one is to treat it as a multiplane ...
    • Yu, John J.; Wang, Carl Feng; Yuan, Mingfeng; Peton, Nicolas; Guan, Xiaodong (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
      A sudden step change in vibration was observed on a 7400 rpm compressor with direct amplitude from 43 um pp to over 62 um pp (trip level) at NDE, thus tripping the unit Vibration reached over 120 um pp at 4000 rpm, compared ...
    • Ponnanna, Bopanna Pudiyokada; Yu, John J.; Peton, Nicolas (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
      Electrostatic discharge (ESD) can cause catastrophic mechanical damage and lower the life span of an asset if not detected early and rectified. Continuous discharge of static electricity can cause micro pitting of bearing ...
    • Yu, John J.; Kirker, Michael; Peton, Nicolas (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station; Texas A & M University. Libraries, 2022)
      A power turbine (PT) experienced a high 1X vibration issue. Balancing was attempted at two accessible planes on the shaft section. However, the unit could only operate with vibration below the alarm level in steady-state ...
    • Ponnanna, Bopanna Pudiyokada; Yu, John J.; Drygin, Sergey; Peton, Nicolas; Schluter, Steven (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)
      This case study outlines how structural vibration was resolved using two different technologies and highlighting secondary issues that can arise due to continued vibration because of structural resonance. Continued high ...
    • Yu, John J.; Hanson, Nicholas (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)
      This presentation provides a success story that sub- synchronous vibration was eliminated on a centrifugal compressor. The sub-synchronous vibration originally occurred at high operational speed on this 5-stage hydrogen ...